Projet numéro 13655 : "REALISATION D-UN CONVERTISSEUR DE FREQUENCE"
For an application, we try to develop a frequency converter following the characteristics below;
| Description | |
| Input |
|
| Voltage | 220 V CA |
| Range | 220 V +/- 15% |
| Frequency | 50 Hz |
| Phase | Single |
| Output |
|
| Voltage | 3 output single phase 220 V CA or 3 modules in // |
| Adjustable frequency (1) | 50 to 10000 Hz (adjustable by only one potentiometer for three outputs) |
| Waveform frequency | Modified Sine Wave |
| Current | 15 Amp (By single phase output) |
| Protection | Short Circuit (Unit will cut out and must be manually restarted) |
| Protection | EMI Filter |
| Protection | Harmonic Filter |
| Protection | Over Temperature (Converter auto cut-off when heat sink temp. over 60ºC) |
| Indicator (1) | LCD display for Input frequency, (one for three outputs) port on connector to be screwed, LCD indicator delivered separately |
| Isolation | Total between the input and output |
| Environment |
|
| Operation temp. | -10ºC to 50 ºC; 14ºF to 122ºF |
| Relative Humidity | 20-90% non-condensing |
| Presentation (2) | In one or two modules (just for tests and prototype) |
|
|
|
Your job
- Developer power electronics for frequency converter
- Realization of the plan and the printed circuit
- Determination of the components
- Realization of a prototype
Commentaire de l' administrateur :